NREL’s Wave-Powered Desalination Device Sets Sail

Published on by in Technology

NREL’s Wave-Powered Desalination Device Sets Sail

The NREL Transforming Energy logo is printed on the side of an inflated tube covered in water droplets

20220307-hero-wec-logo-rightfloat.jpeg
NREL’s hydraulic and electric reverse osmosis wave energy converter device consists of a mechanical drivetrain and hydraulic pump that, once anchored, uses the vertical movement generated by passing waves to pump water to a reverse osmosis desalination unit on the pier. Photo from Andrew Simms, NREL
On a sun-filled winter day, National Renewable Energy Laboratory (NREL) researchers visited Jennette’s Pier, which sits on the shore of Nags Head beach in North Carolina. Amid salty air and crashing waves, the crew deployed a wave-powered desalination test device and anchored it to the nearby seabed—a long-awaited feat for the research team.

“Getting to this point has required a lot of patience and perseverance, but that's part of developing new renewable marine energy technologies,” said Scott Jenne, NREL’s marine energy systems engineering and techno-economic lead and principal investigator for the U.S. Department of Energy’s Waves to Water Prize. “Between building the device and finding a good-weather window in which to deploy, there were obstacles along the way, but we overcame those challenges and finally got the test device into the water.”

20220307-hero-wec-jenne-center.jpeg
Scott Jenne prepares the HERO WEC device for its ocean outing. Photo from Andrew Simms, NREL

NREL researchers began designing the hydraulic and electric reverse osmosis (HERO) wave energy converter (WEC) device in summer 2020 and finished building it in January 2022. The team spent all of 2021 designing and constructing the HERO WEC, which is about 6 feet in diameter or roughly the size of a round dining table. After a year of facing unexpected supply-chain challenges, the team finally found a chance to test the device in the laboratory just before shipping it to North Carolina for ocean trials.

With help from the Coastal Studies Institute, NREL deployed the HERO WEC from Jennette’s Pier—the same location where Waves to Water Prize finalists will launch their wave-powered desalination prototypes. With the help of a spider crane, the 714-pound HERO WEC was hoisted over the pier’s railing, suspended about 2 feet above the water, and then swiftly dropped into the ocean. Experts at the Coastal Studies Institute then towed the device to its anchor site, where it was thoroughly secured overnight before being retrieved. The crew will run through the same motions with Waves to Water Prize competitors’ devices this spring; however, competitors’ prototypes will weather up to 5 days of in-water testing.

An octagonal floating tube with equipment in its center hangs from ropes over the ocean
NREL’s HERO WEC hangs suspended over the water at Jennette’s Pier in Nags Head, North Carolina. Photo from Andrew Simms, NREL

20220307-hero-wec-deployment-center.jpeg

As NREL’s first marine-powered desalination device to weather real ocean waters, the HERO WEC deployment signals advancements for marine renewable energy and desalination technologies but also ensures a fair contest in the nearing Waves to Water Prize DRINK Finale, set to take place in April 2022. Supported by the U.S. Department of Energy’s Water Power Technologies Office and administered by NREL, the five-stage, $3.3 million contest aims to accelerate innovation in small, modular, wave-powered desalination systems capable of producing clean water in disaster and recovery scenarios, as well as in water-scarce coastal and islanded locations.

SOURCE

Taxonomy