What will happen if the water outlet of the slurry pump is made smaller?The inlet and outlet sizes of each model of our slurry pump are fixed, b...

Published on by

What will happen if the water outlet of the slurry pump is made smaller?The inlet and outlet sizes of each model of our slurry pump are fixed, b...
What will happen if the water outlet of the slurry pump is made smaller?
The inlet and outlet sizes of each model of our slurry pump are fixed, but at the site we will use a reducing pipe to make the outlet smaller according to the site conditions. So what will happen if it becomes smaller? Shijiazhuang Slurry Today The pump manufacturer will share it with you.
If the water outlet diameter of the pump is changed from 1 inch to 8 minutes, will this situation have any impact on the water pump? First, although making the water pump outlet smaller will not have much impact, it will slightly increase the pump outlet pressure. As the flow rate of the water pump increases, there will be a slight increase in hydraulic loss. The main impacts are as follows:
1. Making the water outlet of the slurry pump smaller is actually equivalent to closing the outlet valve of the water pump. The pressure of the water pump will increase, the flow rate will decrease accordingly, and the current should also decrease a little. But if the water pump has In the case of vibration, the vibration of a small pump will not become smaller, but may become more severe.
2. The outlet of the slurry pump is reduced, which means that the external environment of the slurry tip has changed, which will affect the overall performance of the slurry pump and may cause the outlet pressure of the water pump to increase, but this change is dynamic. The smaller outlet of the slurry pump has a throttling effect, which will increase the outlet pressure of the slurry pump.
3. If the outlet of the slurry pump is made smaller, if the working conditions on site are not very good, it will have a certain impact on the use time of the small pump. However, if the outlet of the slurry pump is made smaller, it still works normally, then You don’t have to worry anymore.
4. If you want to change the outlet of the slurry pump, do not change it too much. If the change is too big, it will still have an impact on the slurry pump. Poor water discharge will put pressure on the slurry pump, increase the motor load, and the motor will be overloaded. .
5. Changing the outlet of the slurry pump will have the most direct impact on the flow rate of the slurry pump. If it is changed to a large value, the flow rate will increase; if it is changed to a small value, the flow rate will be reduced.
If you want to know more about slurry pumps, please feel free to call us!

Media

Taxonomy