How to adjust the impeller clearance of AF foam pumpAF foam pump is specially used to transport slurry with foam. Like AH and other slurry pumps...

Published on by

How to adjust the impeller clearance of AF foam pumpAF foam pump is specially used to transport slurry with foam. Like AH and other slurry pumps...
How to adjust the impeller clearance of AF foam pump
AF foam pump is specially used to transport slurry with foam. Like AH and other slurry pumps, the gap between the impeller and the rear guard needs to be adjusted. Today we will talk about how to adjust the impeller clearance of the foam pump.
First, if the pump is running, you need to stop the pump first. After all the materials in the pump chamber are cleared, loosen the bolts that fasten the bearing body. Then add an adjusting shim between the bearing body and the material box connection to move the bearing assembly upward. At the same time, rotate the shaft in the pump running direction by hand until the impeller and the guard plate rub slightly. Then tighten the fastening bolts and recheck whether the impeller rotates normally.
For metal-lined foam pumps, the gap between the impeller and the guard plate is 0.5-1 mm. The rubber-lined foam pump moves the bearing assembly downward so that the impeller is in contact with the sheath. Based on the total movement of the bearing assembly, half of this distance is taken as the gap between the impeller and the sheath.
If you want to know more about slurry pumps, please feel free to call us!
Shijiazhuang Pansto Pump Industry is a manufacturer of slurry pumps in Shijiazhuang. It mainly designs, manufactures and sells slurry pumps and accessories. Mainly engaged in mud pumps, submersible pumps, foam pumps, desulfurization pumps and many other series.
Tel/whatsapp+8618033775897
email: evieyang@panstopump.com
web: https://panstopump.com/

Media

Taxonomy