We need the design and construction plans with the following specifications: Device Requirements specification is as follows:   1. The targ...

Published on by

We need the design and construction plans with the following specifications: Device Requirements specification is as follows:   1. The target use of machine is for a drinkable water. 2. The device performance volume (daily inflow): 50 m3/day.   3. Type of machine RO  4. Outlet TDS: less than < 50 ppm 5. TDS Outlet water shall be used for drinking water 6. Per-treatment is needed 7. Have the possibility to add chlorine at the exit 8. Can be adjustable to produce Distilled water. Which means to reach TDS bellow 10. 9. Minimizing the loss of water in producing the drinking water. efficiency is over 75 per cent, which means to have water loss less than 15% 10. WHO standard

5 Comments

  1. You can reach me at US: 318-315-1534 to discuss. Our market ready process recovers 93% of the feed as distilled water (TDS 15) and salt as a solid. Capacity limited only by the space available. Up to 45 liters/square meter. Meets/exceeds all  your criteria (#3 unnecessary) using 99.5% solar energy.

    1 Comment reply

  2. This requires some discussion. I am in The Netherlands (Oegstgeest) until March 12. If you would like to meet, I can be reached at 071-5154417. I have been in the membrane industry for 43 years.

    Peter Cartwright, PE

    1 Comment reply

  3. Our equipment meets this specification, with the exception of #3, in areas with daily solar energy of 6 kwh per square meter. Our normal output is distilled water and the salt emerges in solid form. 99% solar powered. www.suns-river.com has contact information.

    1 Comment reply