Top 5 Advantages of Advanced Electrocoagulation Water Treatment

Published on by in Technology

Coagulation is a common practice in water and wastewater treatment processes, often used prior to filtration or sedimentation. Particles in the solution have a difficult time settling due to their common charges, which cause them to repel one another. To combat the repellant forces, the charges of the particles must be neutralized so that the colloids will cling together and precipitate, which is ideal for sedimentation and filtration. In order to induce coagulation, one of two methods can be used: chemical coagulation or electrocoagulation water treatment. Chemical coagulation has commonly been used in years past, but has a number of unwanted side effects (for more information, please see this article). More recently, electrocoagulation (EC) has been recognized for its effective treatment in many sectors. Here are five advantages of advanced Electrocoagulation water treatment.

 

  1. Can process multiple contaminants in one pass

 

Treatment water often contains several different types of contaminants at the outset of the treatment process. Heavy metals, organic compounds, pesticides, and colloidal solids can be found, among others. Some treatment methods use multiple systems, to remove so many, but EC is able to remove them in a single system with sometimes only a single pass.

 

  1. Low sludge production

 

Unlike chemical coagulation, which produces high volumes of hazardous sludge, EC produces very little sludge and it is non-hazardous. Because pH adjustment is the only aspect of EC that necessitates the addition of chemicals, there is little to add to the volume of any sludge produced. Also, even though most of the electrodes are sacrificial, they do not oxidize at a rate that would add significant amounts to the sludge. On the hazardous side of the sludge coin, the pH balancing chemicals do not create hazardous particulates and the metals are in an oxide form instead of the more dangerous hydroxide form produced in chemical coagulation. EC systems naturally deviate toward a neutral pH when not adjusted with an acid or base, so by the end of the process the pH of the sludge is typically somewhere between 6-8. The low volume and toxicity allow the sludge to be dewatered easily, transported easily, and safely disposed or used as a soil additive on farmland in many cases.

 

  1. Low maintenance costs

 

As effective as an EC treatment process is, one might think that it would require a complex and expensive system. In reality, it is a relative easy system to operate. It mainly consists of a tank that is affixed with a series of metal plates -- which are connected to a power source -- that act as the anodes and cathodes. When the raw water and pH adjustment solution are added to the tank reactor, power is supplied to the plates and the process begins. There are no mechanically moving parts needed, so the system is not easily damaged. Maintenance is also quite simple; the plates are periodically cleaned with diluted acid and after some time will need to be replaced with new ones, which can be relatively inexpensive. Because this system is easy to operate, these systems can be remotely monitored with few personnel required to operate, monitor or maintain it.

 

  1. Produces effluent with low TDS

 

In some cases, EC has the ability to process raw water and lower levels of total dissolved solids versus a conventional chemical coagulation process. The lack of large amounts of chemical additives contribute to this low concentration. Also, by removing even some of the smallest particulates, membrane fouling can be reduced greatly, which can also cut down on operating costs in these applications, because the membranes don’t need to be replaced as often as they would normally.

 

  1. Systems can easily handle water quality variations

 

With chemical coagulation systems, it is very difficult to make adjustments to the process when the quality of the water changes. However, because the Electrocoagulation water treatment system is relatively easy to operate, the only necessary changes that would need to be made would be to the system voltage, reaction time, or the pH of the solution. This can easily be done even while the treatment is already in process.

 

Electrocoagulation is an innovative solution that has gained traction in the water treatment industry in recent years. Genesis Water Technologies, Inc. has developed a specialized Electrocoagulation water treatment system that provides our customers with all of the advantages above plus many more. GWT’s system is versatile and can be utilized in many different sectors to treat process water, wastewater, drinking water and more.

 

Case Study – Paint/Pigment Wastewater Treatment & Reuse

 

Challenge

A large paint/pigment company specializing in organic paints and pigment coating for cars and commercial applications wanted to reduce their operating & discharge costs to meet more stricter discharge standards. The company had been using chemical coagulants/flocculants, however, this approach has generated substantial sludge volumes and discharge costs. Therefore, they were looking for a sustainable solution that could meet their discharge requirements while reducing operating and sludge discharge costs. The initial COD levels prior to treatment were reaching 12,040mg/l composed mainly of color and organic constituents.

 

Solution

Genesis Water Technologies with its local partner designed and provided a solution to effectively handle their water streams. The raw effluent was prescreened and pumped from a primary holding tank to remove coarse organic solids. This prescreened influent was sent to a GWT specialized electrocoagulation (ECG) system which was followed by secondary clarification via a settling clarification using GWT Zeoturb flocculant medium. Tertiary treatment included post micron filtration to remove any remaining coagulated color/particulates in the water.

 

Benefits/Results

70% reduction in discharge costs. Additional operating cost reductions were witnessed from the reduction of fresh water consumption from cooling water and cleaning water usage. The water was reused for cooling tower water treatment and cleaning/wash water applications in the facility. Discharge compliance will be maintained in the clients operation, with a reduction in sludge disposal costs over previous treatment approach which increased the clients return on investment. The results after treatment were reported by a third party laboratory analysis to be 406 mg/l, a reduction of almost 97% in this application.

 

Curious how GWT’s Advanced Electrocoagulation System could help your organization or municipality? Call us at 1-877-267-3699 or reach to us through email at customersupport@genesiswatertech.com for a free initial consultation to discuss your application.

Taxonomy