EcoTec Process "Sewage Water to Drinking Water". A Sustainable Approach Approach!

Published on by in Technology

EcoTec Process "Sewage Water to Drinking Water". A Sustainable Approach Approach!

A technology using‎ unique synthesis of 'Traditional Wisdom' & 'Modern Scientific Knowledge'.‎ EcoTec Process basically constitutes of two Herbicide Treatment Programme to treat Grey / Dark Water in STP's & Fresh / Raw Water Treatment Plants.‎

PRODUCT SUMMARY;‎

1) Herbal, Organic, Food Grade, Non Toxic Products‎ (cationic coagulant polymer enriched with water soluble extracts of Strychnos potatorum, Moringa oleifera and Neem oil for improving the clarity of water)
2) Sympathetic to the existing biological flora 
3) Herbal enrichment increases efficiency and reduces required doses of basic reagents used in coagulation process  Effective in precipitating anionic surfactants 
4) ‎Minimises sludge ‎& Improves sludge dewatering stages and results in improved effluent output 
5) Highly effective when used for the secondary decantation of biological sludge coming from aerobic and anaerobic digesters
6) Enhances rapid sludge settling 
7) Effective across a wide range of pH

OTHER BENEFITS (MECHANICAL / POWER / CHEMICAL / TIME) :

1) With EcoTec Process the following Treatment / Equipment could be stopped completely:

I) Aeration Treatment
II) UF Process 
III) UV Process
IV) RO Treating

To summaries the above EcoTec process drastically reduce the Power Requirements to the various equipment required for treatment. 

3) The TIME required by EcoTec Process to treat the Sewage from the Inlet Point to the Outlet / Discharge  Point is maximum 5~7 Hrs. Hence more effluent could be treated with the same available infrastructure. Therefore increased Capacity Utilisation. 

4) Do away with Harmful Chemicals like Alum, PAC, Chlorine, many more..

Kindly follow the YouTube Link :
https://www.youtube.com/watch?v=HjyL_jWWc7I

Regards 

Rajesh Menon 

ecoclean.pune@gmail.com 

Media

Taxonomy

3 Answers

  1. Senthil kumar  The technology offer here is a Organic Herbal Reagents (Chemical). It can be used in any type of treatment plants ASP to MMBR!

    yes it can be used in a 10 MLD plant.

    Equiment required are Mixing / EQ Tank -> Clarifier / Settling Tank -> Sand Filter -> Clarifier / Settling Tank -> Sand Filter! Add ACF...you have drinking grade water! 

    The Land Footprint can be reduced by @50%.

    Mailing you the details!

  2. Interesting, i am learner in the field of water treatment. we have quiet a big project and looking for eco-friendly solution.
    btw "5~7hrs inlet to outlet" is that HRT in contact tank or the whole process. Can it be used for 10mld treatment plants, if so what kind of area requirement will be there?. if interested please revert.

    Senthil kumar

    9442288926

    kcskumaar@hotmail.com

  3. There is nothing new. When I was in 4th medical we were taken to a water purifying installation at Rajendra Nagar, Patna, that existed then. The professor explained all the steps and we were allowed to drink purified water after purification. Unfortunately, we have lost  our past wisdom, and now are looking for solutions. This applies not only to purification of water but also preservation. Potable water scarcity is the result, and since water bodies have gone dry it has led to water scarcity.