A Hybrid Reverse Osmosis/Adsorption Desalination Plant for Irrigation And Drinking Water

Published on by in Academic

A Hybrid Reverse Osmosis/Adsorption Desalination Plant for Irrigation And Drinking Water

A hybrid reverse osmosis/adsorption desalination plant for irrigation and drinking water

M. Sarai Atab,  A.J. Smallbone,  A.P. Roskilly

ABSTRACT

The hybridisation of brackish water reverse osmosis (BWRO) desalination technology and an adsorption cycle(AD) are considered in this work as a means of producing large quantities of a) water for irrigation and; b) high-quality water for domestic use. The RO process and the AD cycle are represented as numerical models and have been optimised to produce fresh water and cooling.

An existing RO plant can be retrofitted to become an RO-AD process to improve its specific energy consumption and simultaneously produce a cooling effect which can be exploited for local process cooling or air conditioning. A pressure exchanger (PX) and AD are combined to recover the reject from the RO, resulting in a reduction in power consumption. The hybridised RO-AD desalination processes can be considered as the optimum solution for rural areas due to its capability for the production of water for irrigation and drinking as well as cooling for air-conditioning.

Nevertheless, the temperature and feed salinity may negatively effect on RO production, with the AD cycle producing more than 6 m3/tonne s.g of drinking water (< 15 ppm) at 85 °C, additionally, the AD evaporator is not effected significantly by salinity. The proposed plant could produce 24,000 m3/day for irrigation and 6.3 m3/tonne s.g for drinking as well as75 RTon/tonne s.g. Another interesting finding was that the minimum specific energy for the combined RO-PX-AD plant with a capacity of 24,000 m3/day is 0.8 kWh/m3at RO recovery = 45%.

The small-scale combined system was also examined to produce 2000 m3/day and cost of different configurations was estimated as well. The results showed that the cost of the combined RO-AD system is the lowest, 0.44 £/m3compares with other ROconfigurations

Keywords : Desalination, Adsorption, Hybridisation, Reverse Osmosis

https://doi.org/10.1016/j.desal.2018.07.008  

This is an open access article under the CC BY license

(http://creativecommons.org/licenses/BY/4.0/).

Source: Elsevier

Taxonomy