Environmental Monitoring of River Prießnietz, Using 3D-Model with Agisoft Photoscan

Published on by in Academic

Environmental Monitoring of River Prießnietz, Using 3D-Model with Agisoft Photoscan

Environmental Monitoring of River Prießnietz, Dresden, Germany using 3D-Model with Agisoft Photoscan

Abstract

The general aim of the project is to make a basis for a future assessment in environmental monitoring using a 3D model of a small tributary which is modified and created in AgiSoft PhotoScan software.

There is no sampling involved in this project and no monitoring assessment will be done yet after the project. It is inferred that 3D modelling could help in doing future study when there is a need of evaluating and monitoring the river bank and surrounding environment.

This report has successfully demonstrated the importance and the versatility of using Agisoft for 3D modelling for the purpose of environmental monitoring. The experiment has been done using digital camera with a conventional lens and neither ground control points or GPS were used.

Despite that and the low quality was used in some of the sequences, results were achieved in quite fast amount of time.

KEYWORDS : Agisoft Photoscan; Environmental Monitoring; 3D Model Construction; River Monitoring

Find the full study in the attachment

Media

Taxonomy