New Oil-resistant Filter Technology

Published on by in Technology

New Oil-resistant Filter Technology

Introducing a novel new way to keep oil from clogging filters and equipment.

By Zane Vorenberg

IWW oilresistant filter argonne.JPG

This shows a membrane when fouled by crude oil, but coated by titanium dioxide (TiO2), releases oil when placed in water. (YouTube print screen)

Crude oil is sticky stuff and often clogs filters membranes and other equipment used in the oil and gas industry. To address this problem, scientists at the U.S. Department of Energy’s (DOE) Argonne National Laboratory have developed a novel approach, which will prolong the lifetime of the key industrial equipment.

The new invention consists of a type of coating that produces thin films of water-loving, oil-repelling molecules on the surface of filter membranes. These metal oxide molecules grab onto any loose water atoms while resisting oil. To scientists, these twin properties are known as hydrophilicity and oleophobicity.

“One of the best ways to clean oily water is with membranes,” said Seth Darling, Director of the Institute for Molecular Engineering at Argonne. “The problem is that the oil sticks on the membrane and clogs the holes until the membrane stops working. Today, if people have an oil-fouled membrane, either they replace it or they try to clean it with harsh chemicals to wash away the oil.”

The scientists used a method called atomic layer deposition, which uses chemical vapors to deposit a very thin coating of the metal oxide on all of the filter membrane surfaces. They experimented using different metal oxides on off-the-shelf commercial polymer membranes to find which ones worked the best. The team published the results in ACS Nano on August 14.

Atomic layer deposition itself isn’t new, but it’s never been used this way to modify membranes before, Darling said.

“It’s kind of cutting edge,” Darling said. “The coating is just a few nanometers in thickness. If the coating were thicker than this, it would close off the tiny pores. What you want is a minimal change of the pore structure, but you want to change the chemistry of the substance lining those pores.”

To create this layer in the past, people tried to attach nanoparticles to a membrane by flowing them through it or growing them on it. But particles tend to get ripped off as water flows through those systems. Atomic layer deposition is different because the metal oxide film, in this case, forms strong chemical bonds with the polymer to which it has adhered. In the atomic layer deposition process, the membrane is exposed to a sequence of vapors that stick molecules together, forming covalent bonds with the polymer.

“Some polymers bind more easily than others, and some repel oil while others do not,” Darling said of his group’s process working with a variety of metal oxides. “At this point, we have a pretty good sense of which ones work and why.”

Tin oxide and titanium oxide formed the tightest bonds with water molecules, capturing them and layering them across the surface.

“When oil contacts the membrane, it will stay separate because it flows over the water layer,” said Hao-Cheng Yang, a postdoctoral researcher working on the project.

reIccar.jpg

This shows experiments of how well crude oil adheres to nascent and oxide-coated polyvinylidene fluoride membranes (top). It also shows how crude oil might adhere (or depart from) various surfaces (lower left) as well as the oil contact angles on tin oxide-coated membranes after long-term storage in air (lower right). (Image by Argonne National Laboratory)

Fouled membranes can be a costly hassle for the oil and gas industry.

For instance, when oil companies replace clogged filters during the hydraulic fracturing process, they have to shut down their equipment to make the change. Oil-resistant membranes like this could significantly reduce the need for both filter replacement and the downtime it creates, said John Harvey, Argonne’s business development executive handling the technology.

“Just from my knowledge of the oil and gas sector, if we could make a membrane that performs to even a fraction of what we’ve seen in lab testing, it will be a phenomenal improvement over what’s available now. That represents huge savings,” said Harvey.

Another problem in the industry involves the water used in fracking, which often returns from the ground with oil, salt and other contaminants present. Contaminated water cannot be returned to the ground if it poses a threat to aquifers, so the industry often must find another way to dispose of it.

The membranes used now can remove the other contaminants, but they become fouled by oil. The atomic layer deposition process keeps the membranes from clogging to better filter the water passing through them.

“With this technique, they can keep using that water,” Harvey said. “This could be a direct replacement for filter units they’re using today.”

The method could also help in oil spill cleanup efforts. In an oil spill response, diesel fuel is used as a cleaning agent on pipes and containers, which leaves a waste of diesel mixed with oil and dirt. But pipe and container surfaces treated with the oxides could just be rinsed clean, noted Darling.

Darling, who also invented the Oleo Sponge, a material that can soak oil out of seawater, said he thinks the two technologies could be used in concert for future cleanups — and also for a host of things that he and his fellow scientists probably have not thought of yet.

“One thing I learned from the Oleo Sponge is that you can’t envision all the possible applications at the beginning,” he said. “We anticipated interest from oil companies, but we’ve also heard from the cosmetics industry and from sporting goods manufacturers. So I suspect once this gets out, people will also come up with applications we never imagined.”

The scientific team also included Argonne’s Jeffrey Elam and Lin Chen, who work in the Applied Materials division, and Ruben Waldman from the University of Chicago. Much of the work was performed at the Center for Nanoscale Materials, a DOE Office of Science User Facility, located at Argonne.

The article is titled “Crude-Oil-Repellent Membranes by Atomic Layer Deposition: Oxide Interface Engineering.” The research was funded through Argonne’s Laboratory Directed Research and Development Program.

 

Argonne National Laboratory seeks solutions to pressing national problems in science and technology. The nation’s first national laboratory, Argonne conducts leading-edge basic and applied scientific research in virtually every scientific discipline. Argonne researchers work closely with researchers from hundreds of companies, universities, and federal, state and municipal agencies to help them solve their specific problems, advance America’s scientific leadership and prepare the nation for a better future. With employees from more than 60 nations, Argonne is managed by UChicago Argonne, LLC for the U.S. Department of Energy’s Office of Science.

The U.S. Department of Energy’s Office of Science is the single largest supporter of basic research in the physical sciences in the United States and is working to address some of the most pressing challenges of our time. For more information, visit the Office of Science website.

Source: Argonne National Laboratory

Attached link

http://www.youtube.com/embed/5iSwwJdTD8U

Media

Taxonomy