Reduce, Reuse, Recycle: Safe for Water?

What would you do without water?

Farmers in drought areas are especially concerned by this question. As fresh water resources become scarce, one option for water-conscious farmers is to water crops with treated wastewater. This effluent is becoming a more popular option for applications that don’t require drinking-quality water. However, there are still questions about how the effluent interacts with and affects the rest of the ecosystem.

This is where Alison Franklin and her team at Pennsylvania State University come in. Franklin is investigating what happens to certain compounds that remain in the effluent after treatment. She wants to know, “Where do these compounds go?”

The chemicals that Franklin studies are pharmaceutical and personal care products, including antibiotics. Currently, wastewater treatment facilities are not able to completely remove these compounds. They frequently remain in the effluent in an active form.

Franklin explains, “As I learned about pharmaceutical and personal care products in the environment, I became very interested in where these compounds were ending up. What were the possible implications of these low level compounds in the environment on human, animal, and ecological health?”

Franklin and her team set out to follow the environmental paths of four different compounds found in effluent when it is used to spray irrigate wheat crops.

First, Franklin measured the amounts of three types of antibiotics and one anti-seizure medicine in the effluent from the University Park wastewater treatment plant. The water from this treatment plant was then used to irrigate wheat crops at Penn State’s Living Filter site. This site is a special area used to test the reuse of effluent. Samples of the wheat straw and grain were collected before and at harvest time, and the samples were analyzed for the four different compounds.

“The concentrations of the compounds in the effluent were fairly low, so I was quite surprised when we were able to actually quantify the compounds in the samples,” says Franklin.

The researchers found that the pre-harvest samples showed most of the compounds on the outer surfaces of the plant, but insignificant amounts in the plant parts (grain and straw). The samples collected at the time of harvest had trace amounts of all four compounds on the plant surface. Three of the compounds were detected in the plant parts. Two compounds were detected only in the grain and not in the straw. The third compound was detected in both the grain and the straw. However, none of the compounds were at toxic levels.

Attached link

Taxonomy

• Agriculture
• Wastewater Use