Simplest Way to Save Water
Published on by NEERAJ KAPOOR, Your Well Wisher Program - Founder in Technology
The simplest way in the world to save water with no costs:
- Step 1: At a washbasin – Just turn water tap maximum and measure total volume of water in a minute. That’s around 9 liters or more.
- Step 2: There is a knob below every wash basin.
- Step 3: Turn it little to reduce water flow.
- Step 4: Water tap maximum volume of water in a minute should be equal to 6 liters or near it.
So, you save water 33% or more at the wash basin with no cost, time, or much effort.
----------------------------------------------------------------------------------------------------------------------------------
Salient feature of this Save Water tip :
- Zero cost.
- 2 minutes to do it.
- No skills required.
- No device/equipment needed.
- Feasible everywhere
---------------------------------------------------------------------------------------------------------------------------------
The basic idea is to reduce water flow to wash basin and better Illustrated below:
Read Full Blog post at Your Well Wisher Program
Conducted workshop on Save water at IIT Delhi.
Save water design published by Delhi Jal Board and thebetterindia.com.
Innovated or designed Foot controlled Hand wash... can save 70% save on wash basin
Taxonomy
- Taps Design
- Water Supply
- Scarcity
- Sustainable Development
- Water Management
2 Comments
-
I like this. I have been thinking about saving water in household.This need to be simplified especially modernising cistern to contain just enough water to flush out the waste in a toilet. Can we have someone somewhere with skills, knowledge and technology to work on this for saving water sparingly from old systems? This work is good.Well done. Rgds John Gakunga
-
Very good thinking , keep it up.