What is the Best Design for 5CMD Wastewater with COD of 10,000?

I have only 5 CMD waste water. The COD is 10,000 ppm and TDS is 10,000 ppm, I want an easy and cost-effective solution.

Thank you for your suggestions for easy and cost-effective solutions.

Taxonomy

• Treatment
• Sewage Treatment
• COD Removal
• Industrial Wastewater Treatment
• Decentralized Wastewater
• Sludge Treatment
• Industrial Water Treatment
• Waste Water Treatments
• Total Dissolved solids
• Wastewater Treatment
• Water & Wastewater
• Water & Wastewater
• Water and Wastewater Manager
• 0-500

8 Answers

1.  The GlobeCore company more than 50 years is manufacturing vortex layer units The electromagnetic vortex layer unit (AVS) is applied to intensify the process of 

   • wastewater treatment
   •  acid water neutralization, 
   • sewage water treatment, 
   • water purification, and disinfection.

       All processes occur continuously without tanks with mixers. Processes in AVS are intensified by mixing and dispersion of components, acoustic and electromagnetic influence, cavitation, high local pressures ,  and electrolysis.

2. In order to suggest anything we would need to know the Influent and Effluent requirements - www.eecusa.com     ​Bjorn ​Sundbakken

3. Agree with some of the answers that We need more information about inlet wastewater , its origin, overall composition, especially nutrients too and finally treatment targets. 

4. see the pic 

   1 Comment

   1. Imtiyaz kudchikar please provide details of the benefit, cost and what the picture refers to. Otherwise useless to answer the question and we will delete it

      1 Comment reply

      1. the pic was in reply to my previous answer on COD removal process made by one of the participant 

5. we have just completed a project in KSA where in the COD is 12000  also  working on a ETP having COD of 7000.

   We can support you in this .send the detail water analysis and flow rate at info@waterengrs.com

6. In order to suggest anything we would need to know the Influent and Effluent requirements - www.eecusa.com    Bjorn Sundbakken

   1 Comment

   1. Aruna J  please can you provide more details so that we can get better answers to you. 

7. Dear Aruna,
   
   Thinking that most of this COD is soluble BOD without oil and fats, and you can reach the required removal by biological way, you can use 2 to 5 days of hydraulic retention time and our biocleaner system that has a good performance as a submerged bioreactor with a settling tank at the final of the system.
   
   Easy and effective without removing sludge in months because the system can digest sludge in the same tanks.
   
   Send us the lab analysis to we can recommend the needed system.
   
   Regards,
   
   Orlando D. Gutiérrez Coronado

8. Do you have more information on your water? What is the process that generate this water? Is there a lot of oil and fat? Do you need a screener because of other heavier material? Is there any sand / hairs in the water?