How do you handle sewage sludge, organic sludge, chemical sludge, etc.?Generally, 1st Mechanical dehydrate such as Beltpress, Decanter, Filterpr...

Published on by

How do you handle sewage sludge, organic sludge, chemical sludge, etc.?Generally, 1st Mechanical dehydrate such as Beltpress, Decanter, Filterpress, Thickener equipment, The Cake sludge of water content will be about 70~80%wt. However, 'cell water' in Floc can not be dehydrated by Mechnical physical dehydration equipment.2nd, To dehydrate or dry 'cell water', Most of User are dried by hot air, solar dry, such as Solar Dry, Belt dry, Drum Dry, Fluid Bed Dry, or sent to the incinerator for burnt with high heat energy or landfill.   But these kinds of method are having a lot of problem as;- initial investment is very high- difficult to operate.- contamination occurs- costs are also high...etc..  You can choose ELODE to solve all these problem at once, which is a breakthrough dewatering (drying) method of ELODE(electro-Osmosis dewatering equipment). Only operate at 1/3 of your current processing cost, and the initial investment is very cheap, so you can recover it within the maximum 2 years.

Media

Taxonomy

3 Comments

  1. Sewage sludge, Organic sludge and chemical sludge require different processes. For instance, sewage & organic sludge, depending on the toxicity levels, may be land applied. There are processes where it can used on gardens as a topsoil supplement. 

    Chemical sludge generally require chemical processes. The sludge may, of instance, be a metal hydride such as nickel hydroxide. May of the chemical and electrical processes reclaim the metals. If the chemical as things like solvents, they may be refined and reused.

    You would have be very specific in the process description to get a more direct answer. There are literally 1,000,000's of processes.

    1 Comment reply

    1. Please see the

      Movie: https://www.youtube.com/watch?v=LcL8CQIvquI

      The ELODE system is not applied to the sludge process. ELODE is an equipment for drying and dehydrating sludge using Electro-Osmosis system. It is the World first and Unique dehydration revolution equipment. If you have a primary physical dehydrator(Beltpress.Filter press, Decanter, thickener, Volute etc), you can apply the ELODE equipment directly to guarantee a moisture content of less than 40%. Electricity consumption is the world's lowest at 0.25kW / liter. Typical drying equipment is 0.98-1.2kw / liter. Thanks.

  2. When beginning to clean anything your first step is allowing nature to do the job. Ensure minimal parameters are met. Use a microbial balance Archaea, bacteria, and fungus.  No machines required. cost is .7 cents per cubic yard. If industrial operation wind row turner grinders, mixers, then will be 19 cents per cubic yard Eliminate transport of sludge and no need ever again for a landfill.  This is current technology.

  3. Could you provide more information about the method of ELODE. Thank you in advance!

    2 Comment replies

    1. Please see the

      Movie: https://www.​youtube.com/​watch?v=​LcL8CQIvquI

      The ELODE ​system is not ​applied to the ​sludge process. ​ELODE is an ​equipment for ​drying and ​dehydrating ​sludge using ​Electro-Osmosis ​system. It is ​the World first ​and Unique ​dehydration ​revolution ​equipment. If ​you have a ​primary ​physical ​dehydrator(​Beltpress.​Filter press, ​Decanter, ​thickener, ​Volute etc), ​you can apply ​the ELODE ​equipment ​directly to ​guarantee a ​moisture ​content of less ​than 40%. ​Electricity ​consumption is ​the world's ​lowest at 0.​25kW / liter. ​Typical drying ​equipment is 0.​98-1.2kw / ​liter. Thanks. ​