Pure water is an essential requirement for the survival of human beings. To meet the requirements of potable, industrial and agricultural water, the immediate need is to treat waste water, particularly the sewage sludge’s and slimes from the municipal and industrial effluents respectively. These effluents are highly undesirable and unsafe. The removal of contaminants from waste water is a must before they can be reused. The removal of contaminants from these effluents involves the process of flocculation and coagulation. MAGBIS-23 is more effective for killing viruses in water and more effective in water treatment as a flocculant than alum and other cationic polymers. It can be used for: bacteria killing, sterilizing and for subsidence of a swelling in the eye and on the skin. The product chemistry has been approved by the U.S. Food and Drugs Administration as flocculent in manufacturing the papers for use in contact with food and medicines. It is also used as a pigment-dispersant for the paper used for food package. As a flocculent it removes such metal ions such as: Fe, Cu and Ca and reduces the content of acids, esters and aldehydes. MAGBIS-23 COAGULANT DESCRIPTION: The product is a cationic polymer and completely miscible in water. APPLICATION: The polymer body contains strong cationic group radicals and activated-adsorbent group radicals which can destabilize and flocculate the suspended solids and negative charged water soluble matter in the waste water through electro-neutralization and bridging adsorption. It is very effective in flocculation, decolouring, killing algae, bacteria, viruses and removing of organics. Low dosage rates results in big flocs, rapid precipitation and low turbidity residue with small sludge formation. It is adaptable to a wide range of pH values, between 4.0 and 10. The product is odourless, tasteless and harmless which makes it ideal for a wide spectrum of applications from sewage water to potable water. PHYSICAL AND CHEMICAL PROPERTIES: Appearance : Colourless Viscosity (cps) : 8000 – 12000 TREATMENT: When used alone, it should be diluted to the concentration of 0.05% - 0.5% In dealing with different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The treatment level should be determined accordingly. The dosing spot and the mixing velocity should be carefully determined to ensure an evenly mix of the product with other chemicals in the water to enable good unbroken flocculation.
Taxonomy
- Treatment
- Water Management