Universal Measured Irrigation Controller

The Universal Measured Irrigation Controller is the ideal smart controller for any irrigation application.

Use with a tap timer, a programmable irrigation controller, or use as a stand-alone irrigation controller
Fully automatic
Smart irrigation controller – the irrigation is controlled by the prevailing weather conditions rather than a program
Use for both gravity feed and pressurised irrigation
Use for any size irrigation system regardless of the size of the solenoid valve
Use for sprinkler or drip irrigation
Use for weeper or soaker hose irrigation
Use for pressure compensating or non pressure compensating drippers.
A light sensor provides the option of irrigating at night time only without using a timer
You can adjust the water usage by adjusting the control dripper
You can adjust the irrigation frequency by adjusting the float
Adjusting the water usage does not change the irrigation frequency
Adjusting the irrigation frequency does not change the water usage
The water usage is directly proportional to the net evaporation rate
a unique feature of measured irrigation
Respond appropriately when there is an unexpected heat wave
When it rains, water enters the evaporator and delays the start of the next irrigation
The water usage is independent of the water supply pressure
a unique feature of measured irrigation
Uses much less water without affecting the yield
Simple and low tech and so there are fewer things to go wrong

Attached link