Moss and Peat Water Treatment
Published on by Philip Eriksson, Water/wastewater and stormwater consultant at Marktema AB in Case Studies
Is there any research on the use of moss and peat in water treatment?
Taxonomy
- Treatment Methods
- Biological Treatment
- Biological Treatment
- water treatment
5 Answers
-
We have been using spagnum peat for treating wastewater with great success (we call it the SOG filter http://hwt.co.za/sog-trickling-filter/). I have noticed that potable water applications are not very fruitful. What is the application you have in mind?
-
Both are very good adsorbent of heavy metals and organic pollutants. Lot of the research is carried out over the adsorbing property of the vegetable origin material.
The findings are to be confirmed by experiments in laboratory with the specific effluent for pollutant removal.
Rajendrakumar V Saraf
-
there is a review since 1994 about the subject in water research journal
The use of peat in wastewater treatment
and a guidance document in jan2008
https://www.nj.gov/dep/dwq/pdf/NJ_Peat_Guidance_01_08.pdf
hope this helps
-
Good Morning Mr. Eriksson;
Peat, like wood, can be manufactured into a granular or rod shaped activated carbon for organics adsorption.
Warmest regards,
FOR THE BEST TASTE IN LIFE
40 Years Pure Excellence
...into another Half Century re-inventing the water industry !
Think Aquathin...AquathinK !
( visit the all new www.aquathin.com )
** AN ISO9001:2000, ISO9001:2008 , ISO9001:2015 QMS REGISTERED / CERTIFIED COMPANY - (IMS 0192, NQA 12635) **
& 2008 PRESIDENT'S E STAR AWARD RECIPIENT ( visit www.aquathin.com/estar2008.pps )
Alfie
Alfred J. Lipshultz
President & CEO
Aquathin Business Center / 950 South Andrews Avenue / Pompano Beach, FL 33069
T 954 781 7777 / F 954 781 7336 /E info@aquathin.com / Skype aquathinhq.alfie
-
Philip,
Are you looking at water treatment for potable use or waste water treatment / stripping specific elements out of water?
A few years ago I was involved in a project where we were stripping metals (cadmium and zinc) from groundwater using a peat sorption bed followed by a reed bed, we achieved a 99%+ removal rate and it took about three years for the bed to get loaded and need replacement (we had the water percolate through the peat bed that was about 5m long).
There are lots of references on the use of this kind of approach for groundwater remediation, so if you are after performance characteristics I would start there.
Regards
Jim