Using Composite Filter Media, Reverse Osmosis and Ultrafiltration

Published on by in Academic

Hi All,

When is the best situation to use composite filter media, Reverse Osmosis and Ultra-filtration? When can one use these three combined or separately in water treatment?

Thanks

Justin

Taxonomy

11 Answers

  1. Hello, Justin.

    The use of a water treatment technology depends on many aspects, but mainly it is very important two things: quality of  the rawwater (untreated water source) and water quality required (use of water).  There are a lot of possibilities of applications in this regard.

  2. Good day, in most cases, the main factor will be cost. MMF will be cheapest solution, as a pre-treatment to RO. However, if cost is not a concern UF it a better option.  You only use RO if u need to remove minerals content, but in most cases, TDS for the feed is high, so RO is employed. I guess that is the pragmatic approach, use the lower cost when price is a big concern. Hope that help.

  3. Good Afternoon Chinenye,

    The various technologies have specific applications for solutions your prospective Customers require.  Please click https://www.aquathin.com/your-water/tech-ratings and review the Particle Size Removal Chart, both from Aquathin University.

    Warmest regards,

    FOR THE BEST TASTE IN LIFE &

    38 Years Pure Excellence

    ...into another Quarter Century re-inventing the water industry !

    Think Aquathin...AquathinK !

    ( visit the all new www.aquathin.com )

     

    ** AN ISO9001:2000, ISO9001:2008 QMS REGISTERED / CERTIFIED COMPANY - (IMS 0192, NQA 12635) **

    & 2008 PRESIDENT'S E STAR AWARD RECIPIENT ( visit www.aquathin.com/estar2008.pps )

     

            Alfie

    Alfred J. Lipshultz

    President & CEO

    Aquathin Business Center  /  950 South Andrews Avenue / Pompano Beach, FL  33069

    T 954 781 7777 / F 954 781 7336 /E info@aquathin.com  / Skype aquathinhq.alfie

  4. When there is saline river water the prefiltration media takes out the frogs and logs, the UF takes out turbidity and particles and the RO reduces  the salinity.

    George

    1 Comment

  5. Hi.JN. Good question.well answered by MN. 

    Just remember word CATS for purity of drnkng wtr.C clean & clear. A alkaline pH7.5.T-tasty likeable salts. S- sterile bacterias & virus.

    Next set of points are

     P- physical purity use Comp. Fltr..

    C- chemical constituents TDS. use RO.

    B- micro bio purity sterile have UF.

    For drnkng water have all 3 of them.. For industrial use.can go as required..

    w wshs from Prof Ajit Seshadri. Vels U.INDIA .

  6. Hello sir,Composite filter media is work as Catridge filteration for liquid and airfilteration.This is prefiltration.

    In prefiltration 5 -10 micron catrige filtration followed with sandfiltration(150-microns)

    UF is using reduce mostly SDI and NTU. Some chemical industries they are using after ion exchange softner.0.01 micron

    RO is using TDS removal 99.9% monoviolent ions removal.0.001Micron

    All three are combinely coming SWRO/BWRO almost potable water application where influent TDS is 1000-5000 TDS.

  7. To remove only TSS to the lowest level of 1 - 5 NTU, Composite filter media is sufficient. In addition to remove bactories, oxidents like Chlorine, Hydrogen peroxide, Hypo, Ozonization. UV radiation to be used.

    To remove colloids like collodial silica, UF to be used.

    RO to be used if TDS has to be reduced or removed. UF shall be used as pre filter to RO, which improves the life of RO membranes.